Thank you for visiting our service page. It’s necessary to read the entire technology page before using your scale.The digital scale body usually including: shell, sensor, mainboard, power and LCD screen. The points of using a digital scale properly including: right operating steps, smooth surface, suitable temperature, enough power, non electromagnetic wave environment and careful transportation. -->① The best way of operating a scale is to calibrate the new scale after opening the package, the different gravity in different places will affect the accuracy of the scale, the calibration will make your scale work following the gravity of your place; after the calibration,let the scale to turn on for a while, then turn off the scale and turn on again,the scale will work better because the sensor has enough time to get used to the surroundings, please remember it’s not the first time that the scale will work best.If you have enough patience, we recommend you may turn on/off the scale several times,the scale will show the best performance. Also we suggest using the central part of the scale tray to measure.
② The surface will affect the accuracy directly and strongly, it’s so important to choose a smooth and steady surface; the smooth surface also has the meaning of quiet surface, even light blow will also affect the weighing, Smooth surface is especially important when you are calibrating. If you calibrate the scale in an unstable environment, it will always be unstable, even when you remove it from the unstable environment
>>next
COPYRIGHT © COSINE TECHNOLOGY Co. Ltd
